How To Assemble The Taylor Swift 12x16 inch LIGHTED ERAS Frame

How To Assemble The Taylor Swift 12x16 inch LIGHTED ERAS Frame

Thank you for your purchase of the Taylor Swift 12x16 inch LIGHTED ERAS frame. It's a few steps to successfully putting together the frame with YOUR signed CD cover and we'll cover them here. 

1. Open the custom mat and mount YOUR signed Taylor CD insert.

2. Remove frame back and carefully take out the light bracket.

3. Remove the plexiglass from the frame. Peel the film corners of just one side. Put plexiglass back in frame with the corners peeled on the outer side of the frame (we recommend you still keep film on that side of the plexiglass while assembling the frame).

4. With the plexiglass now in place in the frame - completely remove the film from the inner side. DO NOT ATTEMPT TO WIPE PLEXIGLASS WITH ANYTHING but a microfiber cloth as the glass scratches easily. If you have a hair dryer that is best for removing any dust or particles before you set the lights and custom mat back in the frame.

5. Set the light bracket back in the frame.

6. Carefully place the custom mat in the frame.

7. Replace frame back ENSURING wire from the lights snugly escapes the frame through the mat and backing corner holes.

8. Decide on your power source (USB battery or USB a/c) if you can get a small rechargeable battery.  We recommend mounting a battery on the back of the frame for a clean - no wires look when the frame is hanging. The lights will work for 10-20 hours from a small battery.

9. Remove the front film. Hang the frame and use the remote to get the Taylor dance party started.